It’s been some time since an aircraft has been featured on this site, so here’s one completed last year. It’s LS’s ancient 1/144 F-15A, later packed by Academy/Minicraft (and perhaps a few other companies. Inside you will discover a rather schematic scaled-down version of the famous aircraft. Panel lines are engraved, but are deep and wide, especially so in the vertical stabilizers.
There are no pylons whatsoever. Armament is limited to 4xAIM-7 Sparrows, there is no centerline hardpoint/wetpoint with fuel tank, and no trace of Sidewinders at all. No cockpit is provided, there is a transparent canopy that covers the nothing underneath. No probes or antennae whatsoever, and you can forger about the dropped flaps on the boxart.
Another “quick build” – OOB, with only the most needed corrections made to the kit, no preview and WIP images, and no work on other models “in between”.
I only replaced the styrene pitot tube with a home-fabricated detail, made from a 0,6mm syringe needle and 0,4 copper wire inserted into it.
The model is not bad per se, it’s just engineered in a way that makes it preferrable to build it “all opened up”. Wing should be in takeoff/landing position – otherwise gaps ensue, and the bump in front of the wing is smaller than it should be, and I found mine to be asymmetrical as well. Airbrake is intended to be posed open – you will need to remove some material from its edges to display it closed. Same applies to the canopy, which is wider the cockpit opening. I am also not a big fan of the way Academy suggests that you glue the Sidewinders to their rails, same applies to the wing pylons. There’s probably more.