Tag Archives: idler

OKB Grigorov M24 Chaffee: test shot completed (updated images)

In the past couple of weeks I’ve reviewed, built and now completed a pre-production example of  OKB Grigorov’s first full plastic kit, the US light tank M24 Chaffee.

As I have demonstrated in the posts so far, the pre-release communication from the company and some of its friends and loyal customers has been 100% correct: what you see is a complete plastic kit with high level of detail, representing particular features of the actual vehicle, and with minimal compromise with fidelity despite the small scale.

read more

OKB Grigorov M24 Mammoth edition – the extras

As you are aware OKB Grigorov is also offering the so-called “Mammoth edition” of their injection molded M24 Chaffee. There are several PE frets and a machined brass gun barrel included in that boxing.

First off are the side skirts. You’ve noticed in my original review of the plastic parts that the skirts are represented in styrene, and that their edges are beveled to appear visually thinner. For those of us who are not satisfied a fret numbered P72017 offers replacement side skirts complete with fastener detail.

read more

OKB Grigorov M24 Chaffee: test shot build part 2 and ready gallery

Last time I reached the point where suspension arms were set in place but no wheels were added. First let me take you back a little and show you the bottom of the hull with some suspension detail.

As you can see we have a pretty busy suspension set and this is positively something you want to take your time on. Consult your references on the position of the arms, as I had mine too folded in which caused negative consequences with track runs as you will see shortly.

The main point is this is a very detailed kit, and the only ejection pin mark you’ve seen so far is on the inside of the commander’s hatch. There are no more, period.

read more

OKB Grigorov M24 Chaffee: test shot build part 1

Last night I shared some details of the test shot. Tonight I am posting a few images of the build process.

As you have already noticed this is a complete kit, not a short run one, with a lot of parts and excellent detail. Despite being a test shot the set that I have fits very well.  What you see here is bare plastic and glue with the minimal cleanup required so parts fit. No filler or primer was used.

I started with the turret. The locating pins and the shape of the guiding surfaces helped mate the upper and lower part nearly perfectly. I used a bit too much glue, so needed to clean up a bit.

read more

OKB Grigorov M24 Chaffee test shot review exclusive for Modelcrafters.net

This post is a special treat, as it’s the first time I am getting a kit that is not available in the market yet. In fact I am lucky to have been the first to get a copy of OKB Grigorov’s Chaffee outside the factory and OKB themselves.

OKB Grigorov M24 Chaffee test shot
Part overview

Onto the shots. 4 grey sprues, well over 200 parts, some great detail, all hatches open, separate OVM tools and a lot more!!!

Let’s start with the hull parts.

Note  detail on the conical return roller bases, the suspension arm sockets and bump stops, the shock absorber attachment points. The suspension arms are separate parts as are the final drive housing covers.

read more