Tag Archives: resin

OKB Grigorov’s M109 US SPH, kit 72002

Alright, another resin + PE monster from OKB Grigorov, and despite it’s lower Cat. No. (the AT-T was 72007) I got it in the beginning of this year to build for a review.

I must say I liked the kit from first sight. Relatively small number of parts that will make for a detailed, compact model of a vehicle that has a bunch of modifications still in use today, 50 years after its introduction.

So – onto the kit.

All the parts are packaged in zip-lock bags, all protected by bubble wrap and a sturdy white cardboard box. There are

read more

AT-T from OKB Grigorov

The weathered and completed (as of today) model. Added:

– windshield wipers – “wiped area” masked off, the rest sprayed Vallejo satin varnish;

– idlers, drive wheels and tracks;

– fire extinguishers;

– 0,3mm winch cable with scratch-built hook;

– 0,6mm RB Models tow cables with kit eyelets;

– headlamps (blackout lights);

– windows in the doors, attempted imitating seals with acrylic gel and paint;

– weathering, and a lot of it. An experiment with a new technique went so far as to lead to completely strip-down of  the paint on the hull/cargo bed assembly.

read more

Building OKB Grigorov’s AT-T, part II

In the first part of the build I basically completed the lower half of the vehicle and the cargo bed. Back to the crew compartment.

The AT-T’s front lights reside at the very front of the bonnet/hood on metal supports. In the kit these are PE parts, which supposedly butt-join the resin engine compartment, and on top of which the lights are glued. Images of broken-off detail in my mind lead me to soldering a piece of wire (in red) through each support like this (looking from the front):

Front light support scheme
Front light support scheme

This would make the whole thing a bit stronger.

read more

Building OKB Grigorov’s AT-T

I started construction with the chassis tub. First thing to do is gluing the back wall. Next I cut the suspension arms out of the casting block and it turned out the holes for their pins are much too small. Off with the pins, arms are drilled through, as is the tub itself – naturally observing the locations of the original holes.

I decided to use thick copper wire passing through the whole tub to make new pins. This would ease me in terms of affixing the pins and make the whole thing stronger.

read more

Brassin detail set 648 026 – MiG-21 wheels 1/48

After delivering their exquisite MiG-21MF the Eduard crew went on to produce a number of sets to further improve the appearance of this important machine in 48th scale.

One of the areas that would definitely benefit from an aftermarket set are the tires. Dimensionally correct the kit items are really “bald” and flattening them could result in holes. This set replaces all three kit wheels with beautifully cast resin items, thread present on all three of them. Two hub options, etched details and masks are also included:

read more