In recent years Zvezda has released multiple snap-fit aircraft kits in 1/72 scale that include excellent pilot figures. They have now “gone full circle” by releasing ground crews to accompany these kits. First off – the Luftwaffe crew.
As shown on the now-standard box – there are 5 figures, a bomb trolley with a bomb, a fuel drum and a jerry can included. As with some other sets you can either use a single base for all the guys, or use individual ones.
Typical for the Art of tactic game series the plastic is light gray, parts are on 2 sprues.
The Bf (or Me) 109 needs no introduction. It is such an important aircraft in the history of aviation (and the world) that I am unable to think of a mainstream modelling company that has NOT offered a version of the 109. In 2014 Eduard unsurprisingly extended their product line with a G-6, the most numerous of the WWII versions.
There are just 4 sprues in the standard box (used for most 1/48 scale aircraft the company produces AND the Royal Class editions), so contents will rattle about as you’re taking it home. Thankfully all frames are tightly packed in sealing bags and there is little to no chance parts will be damaged.
MiG-29 has attracted the attention of multiple scale model manufacturers even when it was only seen in blurry pictures. Available kits vary in scale, accuracy and markings in area so wide it would take a book to describe.
The reason I picked up Revell’s 1/144th MiG-29 was its R-60 missiles that I used in another model. I was thinking of giving it away, because strange as it may sound I am not a big fan of the aircraft for a number of reasons. I elected to keep it though, so it will be briefly presented in this article.
Today I received two of OKB’s latest releases – their Winterketten and Ostketten resin tracks for the Pz III/IV family of armored vehicles. I was impressed with the casting and level of detail, so I am in a hurry to show you what the fuss is all about.
First thing about the track sets is that they are provided in 4 bands per set, each about 102mm long, like so:
Considering you need about 175mm per vehicle side for the lenghtened III/IV chassis on which a Hummel or Nashorn was based – you’re pretty well catered for in terms of spares.
A year after it’s done I am finally posting the gallery for this model.
Aside from the typical Dragon BS instructions that are supposedly there to keep you alert the only real problem to me is that insane idea of a gun shield. There is no simple way this is getting the proper shape and position the way people at DML HQ see it. And then there are those wingnuts…
The truth is the kit is a solid, high-value, good build that could turn to impressive completion by itself, in a vignette or a diorama. All it needs is a properly dressed gun crew and a few brass shell casings for you to scatter around.
Since I actually did build the thing about a year ago, I’ll post my thoughts about the construction sequence, and especially about the instructions and some peculiarities of the kit.
There are 23 construction steps and though they are logical I built my example in a bit different way. Also, I noted some errors I am discussing below.
Step 1: wheels – lots of them. Assembling the front wheels is no problem. The drive sprockets are handed (different) on the actual machine, but not in the kit. Dragon has issued you with 2 identical assemblies.
Sprue A – 90 parts for the suspension, engine covers and firewall, front lights, fenders, instrument panel, etc.
Dragon has put its favorite slide molding routine through its paces in this kit, and even without it the effort is still rather impressive. The cooling gills on the bonnet halves have been molded through – and most other kits will require a PE set for this. Also, the pattern on the radiator is discernible even if you look through the delicately molded guard grille.
The heat shield for the muffler also has its cooling gills molded as the real deal, so your weathering efforts here will be worthwhile. Delicate suspension parts and mirror supports, as well as lightbulbs molded in the bottom of the headlamp reflectors really contribute to the feeling you’re dealing with first-rate kit.
Since I needed decals in order to complete the model I had to raid the kit collection and source some. The victims were an Italeri M113 and a Revell (Matchbox) M40 SPG. I also used the lettering from their sheets to make up a code for a 5-16th Artillery machine (but sans the yellow weight class sign). Mr. Decal Softer helped the markings get grip and conform to the model surfaces.
The decals were sealed, and I used minimal amount of pigments to add to the dusty appearance. Diluted H2Oils (Burnt Umber and Paynes Grey) were used to simulate the leaks. Mixed with some dry pigments they helped create the mud buildup on the front upper sheet.
Alright – so why do I keep labeling articles using the full kit name and number? Because most companies “milk” their designs and have multiple releases using the same basic kit (or some of it). OKB Grigorov has already released the A1 and A2 versions of the M109, kits No 72004 and 72005, respectively.
Back to our initial SPH variant.
What’s the first thing we usually do? Dry fit major components so we’re able to judge size and get motivated by the upcoming result! I sanded the turret base and the hull recess that is intended to accept it a bit. The model is pretty small, yet rather heavy for its size.